Quote:
Originally Posted by drdave3
Where did you find the precision caps?
|
More or less I just drilled down in the parametric search on mouser, but there's a bunch of 1% 500V units.
Basically drill it down as package type, so radial and axial, pick a voltage, then poke what precisions are available in your desired value range...
http://www.mouser.com/Passive-Compon...z0wljoZ1z0z7l5
If you mean where did I find the precision caps used in the bridge itself, here's what I got.
http://www.mouser.com/Search/Product...67-ECW-F4205HL
http://www.mouser.com/Search/Product...2222-419-72004
http://www.mouser.com/Search/Product...-CD15FD201FO3F
Yeah, the big one is 3%, I couldn't find a suitable 2% that was both in stock and < $10. When I have a bit more money to toss around I'll look into it.
Not like it's any major job to open it up and upgrade precision, 10 mins, tops.
Package is out for delivery!
Hopefully before 1400...