Just a quick question,BobAndersen, Looking at the quote below and the picture... What is the value (mfd value) of the Safety cap and the type of cap (Caps from Justradios website)? I looks like you installed it from one side of the ac line just before the pilot light to chassis ground at that term strip. I just can't see if you used the chassis ground or another terminal on that strip.
Quote:
|
Originally Posted by
Here's one of the radios all done with the rebuilt cap in place. I added a safety cap across the AC line and added a fuse.
[IMG
http://www.bobandersen.com/images/philco%2046-420/hippo-402.JPG[/IMG]
|
Also, my schematic shows a 7C6 tube for the Detector/Audio stage but I've got a mini tube just like your picture, and the tube is a 50B5. Still looking for a correct schematic. Any idea where I can find one.. I could just use my Tube book and pencil
it in I guess.
As someone else in this thread mentioned.. During the war they used whatever parts were at hand.... and got the job done.. Get 'er done!
I appreciate your time. Fun to bring back an old thread too..
Buzzsaaw