Quote:
Originally Posted by andy
Can't you just probe the connections on the convergence panel itself?
|
Some points have too many leads from capacitors and resistors crisscrossing . It's a short waiting to happen.
I guess I could map out the terminal pins and attach the probe on those points. Those are on the front side of the board and less chance of shorting something out.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|