[Tomcomm]

The first replier to my thread seems to consider himself the VK Safety Nanny and member attack Pit Bull. Has he considered getting professional help with his obvious anger management problem? Just my opinion..............

That said, my normal +425v current of 265ma is always measured across the HV cage fuse clips. RCA requires a 300ma fuse so the flyback is well protected. I usually use a 500ma fuse since I couldn’t find a 300ma item but accidentally used a 1amp fuse when the flyback cooked so it didn’t blow. This wouldn’t make any difference since the flyback shorted and was doomed.

My only “experiment” with the CTC2B’s power supply was the replacement of the big selenium rectifiers with small silicon power diodes. This simple and logical change raised the B++ from 392v to 425v or 8.4%, well within RCA’s safety margin. How many members performed this same “experiment” on their sets??