Quote:
Originally Posted by Eric H
If you still haven't changed the Focus Divider I would start with that.
If it's arcing then it's defective, anything defective in the HV circuits has the potential to put interference on the screen, so start with that then look elsewhere if that doesn't help.
|
I changed the focus divider, and while it didn't help with the bars or moire, it did give me better focus control and a sharper image.
The wire was just press fit into the anode cap. I'm attaching a couple pics of the wire removed and the cap. There was no crimping or set screw. The farther you insert the wire, the tighter it gets.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|