[QUOTE=Kevin Kuehn;3238202]
Quote:
Originally Posted by vortalexfan
I'm guessing the hum bucking coil is the black and white wires coming out of the coil on the back of the speaker shown in the picture below?[/Q
I'm not familiar with that radio, but I'd guess the black and white wires are L16( the speaker field). The humbucking coil is a separate coil(likely sandwiched to one end of L16), that is wired in series with the voice coil. Reversing the field could have the same result as reversing the hum bucking coil, resulting in more hum. The way to figure that out is to try reversing it. Whichever way produces less hum is correct.
|
Ok, so I'm not sure what would be different between the speaker being in the cabinet and out of the cabinet but with the speaker out of the cabinet the hum is non-existent, and I'm not sure if this would of affected it or not but I did replace the old broken speaker plug.