View Single Post
  #6  
Old 03-12-2017, 06:04 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,826
Agree on the cleanliness - spotless! Be careful with any adjustments - I'd follow the alignment procedure for the remote chassis - do you have a Zenith manual for the remote chassis? Sams is awful with their alignment procedures for remote chassis (at least for RCA and Magnavox...).

If that is indeed a sensitivity control - be careful - too sensitive and some features will quit working, as the gain is increased to the point of saturating the amp, and causing the control pulses to widen. Also, too much sensitivity can cause it to respond to other sounds - keys jingling on a key chain, the phone, etc.

Cheers,
__________________
Brian
USN RET (Avionics / Cal)
CET- Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote