View Single Post
  #6  
Old 10-14-2017, 07:34 PM
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 3,148
Yup they suckt so did Admiral especially UG'ing from a 23EGP22.

HINT
Put a box under the CRT. When its loose the cabinet will drop down
& you can easily pick up the jug. In reverse use a light & mirror
to be sure the CRT is centered then torque it down. Some Jap
sets come out the front & are bolted from the front. Do the same
but lift the cabinet away. Have a 10 MM deep on hand for them.
Newer sets with "ears" to mount usually come out as an assy.
Shield, DGS coil, yoke etc. Pull & put on table, also the new CRT
& move things over standing up. The lazy way is the best here.

73 Zeno
LFOD !
Reply With Quote