Quote:
Originally Posted by TinCanAlley
Okay, here's the B+. The DMM has it at 129.8V and the waveform is attached. It doesn't look clean at all. Not sure why there are two on the scope. Scope had the 10x probe, volts/div of 1 and the time/div of 10us.
|
Is that the main B+ or one of the video outputs ???
The video out B+ is 240 VDC & filtered by C270. This cap
is notorious for causing jailbars in almost any brand.
Check C270 before going further.
In any case there is 5V of garbage there that shouldnt be.........
73 Zeno
