View Single Post
  #9  
Old 04-07-2017, 09:41 PM
reeferman's Avatar
reeferman reeferman is offline
VideoKarma Member
 
Join Date: Jun 2004
Location: St. Louis
Posts: 583
Kevin,
Those things were usually a bear to converge back in the 60's. They don't get any better with age. So don't feel too bad.
Looking at the first picture I’d say adjust the blue lateral. But after looking at the next picture that wouldn’t help much. The dynamic convergence is off.
Check the rectifiers and other components on the board. You might try rotating the assembly. It might make a marginal difference. Maybe
Just be aware that converging sets is a lesson in compromise. Some think that near perfect convergence can be obtained on those sets. Never have and never will. Adjust for the best overall convergence.
My advice is to enjoy the picture. It's amazing how fast you lose track of the convergence.
Good luck and have fun.
Phil

Last edited by reeferman; 04-08-2017 at 01:10 AM. Reason: brain fart
Reply With Quote