|
reflowed the 4/5 pins on that socket they looked a little cold. I also reflowed the ground stakes. Working ok, but will wait until tonight for darkness and see if I can wiggle it OFF now. I used my pick to also tighten up the sockets.
while I have good light out in the garage I plan to pull the tuner case off (I found one that fit) and clean the tuner contacts. the pots have been cleaned and lubed but for the pots on the back, I am going to leave them be for now since I dont think they get much use anyway.
Still have to find a place to mount the cathode fuse for fusing and checking the HOT.
|