View Single Post
  #19  
Old 08-02-2017, 08:06 PM
CPQ5360 CPQ5360 is offline
Florence
 
Join Date: Jan 2013
Posts: 39
I removed the circuit board from the neck of the TV - no arcing on the socket. No improvement with the board re-seated (in case there was any build-up of oxidation). There is no silicone or anything there that could have become conductive.

Upon observing the CRT again, the arcing appears to be just inside the glass. But I assume that isn't possible without air in the tube, so I'm guessing that the lead has broken just outside the glass, and the CRT is a goner.
Reply With Quote