[davet753]

Here's a Gonset Communicator II I picked up recently. It seems most of the tubes in the receiver chassis don't match what the service manual says, but since my manual is for the 2 meter version, and this rig is a 6 meter, that might explain what's going on. This old gal has some issues, that's for sure, but before I get too deep into it I'm gonna need a good diagram.

Would anyone happen to have a manual for the 6 meter Communicator? I could probably use the Communicator I or II, as long as it's for 6. The Communicator III is quite different.

Thanks!