Thread: Too good to be true?
View Single Post
  #5  
Old 09-23-2017, 05:54 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
  
Join Date: Jun 2007
Posts: 2,836
Quote:
Originally Posted by Jon A. View Post
I don't need a CRT for any one of those jets, and without a cross-reference guide to make sure one made for the F/A-18 would work in the CF-188A or CF-188B it's just too risky of an investment.


They'd work, but only with a couple of 1.95mm thick shims, approximately 26.5mm in diameter placed trans-axially along the yaw axis. Thirty shims in all, or you could just say "screw it" and spend the 30 shims on some Labatt Blue. Yeah, 30 shims would do.....


















After such, everything would seem to work just fine.
__________________
Brian
USN RET (Avionics / Cal)
CET- Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
Last edited by Findm-Keepm; 09-29-2017 at 06:39 PM.
Reply With Quote
Audiokarma