Quote:
Originally Posted by Electronic M
As miniman said you want min current in operation, BUT there is usually a safe(ish) max that is published in the sam's for most sets (usually in the horizontal adjustment procedure). If over max after warm up assume something is wrong.
|
From where do I measure the current? Manual says the h out tube fuse holder is where the current can be measured I hooked up my 27fm and I am not getting anything....
__________________
Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
|