|
did the service switch, did not note the center position, will do later tonight.
in service even with brightness all the way down and the red drive all the way down I had a red line, could not make it just go away. The green and blue I was able to make just go away but since I was stuck with the red, I just adj the green and blue to the same approx brightness.
after the above adj the overall brightness in the norm position seems about right and grey scale seems good.
it did not converge either on the center line in the service postion. The pic looks fine in normal viewing. I will put a dot and cross hatch on it later to see how that shows up.
|