Quote:
Originally Posted by DavGoodlin
I have two of these BK 467s, one from a shop closing and another from a swap meet. One has a dead filament supply and the other has G1 supply failure. both seem to have loads of cold solder joints.
|
That's probably what's wrong with my CR70 parts unit. It won't light the tube neck on any setting.
In my experience with test gear, taking a gamble on something that "powers on but is otherwise untested" usually pays off and is a very good bargain. It doesn't surprise me that the guy you got the B&K from was blowing smoke. No negative feedback from a swap meet.