|
It is one big molded bubble piece on the front with the flanges and decal on the edge and a flat surface and flange glued to the back side. The filler port is below on the front half. No scanning here.
The way it mounts is with some upper rear clips that hang on the horizontal louvers and a lower bumper post which explains all the broken louvers. It is heavy. Now back to our topic.
__________________
“Once you eliminate the impossible...whatever remains, no matter how improbable, must be the truth." Sherlock Holmes.
Last edited by Dave A; 10-10-2017 at 10:43 PM.
Reason: text
|