|
some epoxy should be able to fix that particle board, would be better to remove it, then put some wax paper down on the floor so the epoxy does not run everywhere. Have some would shaving handy to fill in voids from missing bits.
the slime is typical of magnavox, rubbing alcohol and ebow grease will get it fairly clean.
Pots tend to be noisy, lots of action behind those vert mount boards, easy to short wires out.
RCA clone but for the silly swap of the fly and power trans. Like rca the fly is the weak spot unless already replaced with a better one.
good chance it will work as is, since the safety cap is blown, may as well get it out of there, but the rest of the caps are from an era that was pretty good.
|