I went back through the subsequent color alignment steps to double check everything. I posted directions back a few pages. The only notable item was for the color sync alignment you adjust L34 for zero beat on screen and minimum movement of color bars through picture. This was very dependent on fine tuning and my rf converter and signal bar generator both require a bit of different fine tuning. Adjusting to the signal bar generator probably means the rf converter could be off, maybe there is plenty of "wiggle" room with this adjustment.
The last color alignment step is to adjust the 3.58mc traps. The directions are to connect a color bar generator to the antenna, connect the scope to test points RR, SS, & TT and adjust each trap for minimum for minimum 3.58mc response. My question, what am I looking at on the scope and what component is the 3.58mc response?
