Quote:
Originally Posted by jr_tech
I'm guessing that the screws that attach the amp board to the heat sink might be filled in with solder to prevent removal... these *should* be left intact. the screws that hold the board/heatsink assembly to the chassis are the ones that need to be removed to remove the amplifier.
Try a better screwdriver on the tuner screws. Do you have any "Liquid Wrench" ?
jr
|
No I don't have any liquid wrench, and I tried all the screwdrivers I have on the screws and they won't budge without just about stripping out the heads. So I don't know what to say about those screws. although those screws do have a very bad case of cadmium disease as well as a lot of other parts in this unit.