View Single Post
  #33  
Old 04-04-2018, 07:08 PM
Notimetolooz's Avatar
Notimetolooz Notimetolooz is offline
VideoKarma Member
 
Join Date: Mar 2014
Location: Dallas, TX
Posts: 547
Oh, I see what you are doing now.
I was thinking you wanted it for chassis wiring.
For the capacitor re-stuff I would use bare solid wire, if the leads on the caps aren't long enough. Then, where needed, use heat shrink tubing for insulation.
To get the bare solid you could just remove the insulation from any solid wire. Use could also buy bare wire, often called buss wire. Cloth covered wire wasn't used much in a set as late as yours. Plastic covered wire is cheaper also.
Solid wire is OK for going point to point on the chassis, like from one tube socket to another or a terminal strip. Stranded should be used for thing like CRT sockets, separate speakers and separate tuners. Stranded would be OK for point to point also, that makes it more versatile. Solid is slightly cheaper and is easier to get into a terminal hole so the manufacturer used it for point to point.
Reply With Quote