Quote:
Originally Posted by zeno
I am with Tom C. Discharge the CRT & pull off the anode lead.
Pull the 3CU3 socket & clean it with 91% isopropyl alcohol.
Clean all the wires to it & the "cup" also. Put back together with
the new 3CU3 & try it.
BTW dischage the CRT AGAIN before reassembly !
BTW #2 most HV rect tubes DO NOT have a filament glow !
73 Zeno
LFOD !
|
I'd also clean the regulator socket and cap above the cage - it has full 25KV on it and looks as though it may be just as dirty, judging by the plate cap.
HV loves and attracts dirt - it's a much lower resistance/impedance and may be your only problem.
__________________
Brian
USN RET (Avionics / Cal)
CET- Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
Last edited by Findm-Keepm; 09-29-2017 at 06:39 PM.
|