Quote:
Originally Posted by tvcollector
Very nice.. These Zeniths seem to be popping up lately.. I wonder how the CRT is..
|
Apparently the CRT emissions are good!
I coaxed my CR70 into working. My CR70 was tripping its power switch/breaker when I had this CRT plugged in and all set up. I found that turning the filament range setting all the way down, switching it on, and then bringing up the filament adjust to the 6.3V kept the switch from cutting out. Guess I should re-cap the CR70? Anyway it showed good emissions on all three guns, even with 5V on the filaments.