|
got the seat switch in, power seat now works as it should woo hoo. Slowly but surely I am getting everything fixed on this old truck.
to do list:
brake line (slight kink done years ago in Mast cyl replacement, I have a bent line from a junker)
fan and fan clutch
foam surround the AC condenser
air dam corrections to 134a specs (still have R-12 but planning ahead)
hood light
driver side door panel light
driver side seats (the top us attached with a zipper so should be easy to remove for repair of the leather)
driver side bottom will wait for cooler days but at least I know how to remove the seat, easy now that I can move it fore and aft.
headliner
paint
that should get it back to as like new as possible. The drive line is solid, has a rebuilt trans and the motor run very smooth no oil or coolant loss. The only real prob is a very slow rear main bearing leak that I will just have to live with.
I would like to get another 20yrs out of it.
|