View Single Post
  #9  
Old 02-04-2014, 12:25 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
just be aware of the fact that the glass neck parts are bonded to the crt bell and would be subject to a lot of stress if force was applied to the neck, You want to make sure you only grab the CRT by the metal bell, hands off the neck.

I do not know how strong that glass/metal bond is, but its a much smaller diameter where it attaches so all the force from the neck is going to a smaller bond area.

that being said it was not a big deal on my CTC-5 to remove the CRT (a 21AXP22). Just take pics, note how he anode lead is attached and routed, and how the rubber seals are attached.

Be careful not to overtighten anything when putting back together, you do not want to crack the plastic bell covering.
Reply With Quote