View Single Post
  #1  
Old 01-01-2014, 05:27 AM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,344
RCA remote control standard SC-601

Basically this unit will substitute for the remote control and transducer. It produces a signal at all the frequencies listed on the 2 dials, modulated or not (notice later the addition of the 2nd dial and set of crystals for the frequencies for remotes, which according to the chart on top are for CTC 38-71 sets).

All I did to it was recap, replace the missing screw terminals on the front, and clean some rust off the chassis. Pictures show it working. This is an unusual unit and I haven't found any information on it, even looking in the old RCA test equipment catalog I have. Date on the front says 12/66, which makes sense as it doesn't produce the frequencies corresponding to the older CTC 9-10-11 remote you see me testing it with in the pic. The 5th pic shows the unit producing its own signal, in the 6th it shows what it's receiving from the remote.

Last edited by Adam; 11-24-2016 at 08:55 AM.
Reply With Quote