Quote:
Originally Posted by Findm-Keepm
I've converged quite a few - the steps are generally:
Degauss
Set purity
Set grayscale
Set R/G/B center convergence using static magnets and Blue lateral assy
Follow steps 1-9 (some have 10 or 11 steps) on convergence panel - left side, right side, top/bottom is generally the order, although some are different.
Zenith convergence is about the easiest, after Quasars, IMHO.
This all requires a bar/dot/crosshatch generator, I assume you have one? If not, using program material is not recommended, but some of the best techs I know can, in a pinch.
Cheers,
|
Okay so I am doing it correctly then. It has something to do with the sets linearity being a little weird then. I'll see if I can figure out how to adjust the linearity correctly, then try and see if it will accept a convergence better.
I know I have both linearity and height nearly at max on the controls to get a full screen on the image. I'm going to start checking resistors in the circuit and see what I get.
I never try and set to a moving image. I have adjustment patterns I feed though my modulator to the set.