I've converged quite a few - the steps are generally:
Degauss
Set purity
Set grayscale
Set R/G/B center convergence using static magnets and Blue lateral assy
Follow steps 1-9 (some have 10 or 11 steps) on convergence panel - left side, right side, top/bottom is generally the order, although some are different.
Zenith convergence is about the easiest, after Quasars, IMHO.
This all requires a bar/dot/crosshatch generator, I assume you have one? If not, using program material is not recommended, but some of the best techs I know can, in a pinch.
Cheers,
__________________
Brian
USN RET (Avionics / Cal)
CET- Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
|