C903 is in 135V regulator so try it. Also check for 135 VDC at
pin 6 of the FBT or pin 7 of the reg module CP901. Must
be 135V !
BTW the screen shot dont show much, in the case use a
few real pictures.
73 Zeno
Quote:
Originally Posted by StarquestMan
well just after posting my last post i started looking at the residue pattern again and noticed that it may be coming from that dark brown Nippon Chemi-Con cap at c903 and running back towards the flyback making it look like its originating from the wax dipped cap next to it. now that i think of it this capacitor seemed to stick out as being the warmest cap i found.
|