Okay to the scrap bin with the idea of a NOS cap.
I went looking for axial lead caps of the correct values. The 40uF is easily found at 500V
The 50uF @ 475 to 500V is impossible to find in axial lead, however. I have found on multiple sites, 47uF @ 500V
It's only a hair below 50uF, would this be safe to use? I'm sure it has to be better then the old wore out can that's in there.
Because if I can sub the 50uF with the 47uF, I can just buy and install two of the same kind to replace the can below the chassis. I already know I can sub the 40uF with the 47uF and still be safe.
|