[zenithfan1]

Originally Posted by freakaftr8

BTW, does anyone know how to remove the safety glass? It's quite dirty behind there..
Thanks!

That set is looking good!

As for the safety glass, you have to CAREFULLY pry the top and bottom gold trim off. The top pried straight down and bottom straight up. I like to protect the wood with blue painters tape but if you pry too hard the wood will get a dent, lay something flat under your screwdriver to spread out the pressure. The trim is also easy to distort so be careful and pry up small sections at a time until it comes loose, someone bent mine years ago but it still looks ok with only a few wavy spots. Once those pieces are removed, there will be four clips holding the glass, there are like small levers on them that you pull out. Pulling them will make the clip sort of bend in the middle but it's supposed to do that, if you look closely it will make sense how they come out. The cover of the sams has instructions too but they aren't very detailed.
I hope this helps, post a pic if you have any problems with it.