Thread: My new CTC-15
View Single Post
  #29  
Old 11-07-2017, 01:49 PM
Vaultovinyl Vaultovinyl is offline
VideoKarma Member
 
Join Date: Jan 2009
Posts: 5
Well, it's arcing all around the diameter of the tube where the metal frame surrounding the tube is. It arcs in that 1/4" gap. It sizzles after the set has been on about 5-10 seconds. As the HV comes up and the CRT comes on it intensifies. The dag coating sounds like the issue. I'll try that when I get the chance to work on it.

As far as everything else goes, what you listed is where I'm headed to. I've already tested tubes. A couple are marginal. I need to go through my stash and find replacements. I plan to give it the thorough going over when I get the free time to do so. As far as soldering joints, a long departed repairman I knew many years ago told me "95% of the repairs I've made in my life were just busted solder joints." I've found that and, with the passage of time, capacitors to be the majority case as well.
Reply With Quote