View Single Post
Old 10-01-2017, 10:26 AM
Polaraligned's Avatar
Polaraligned Polaraligned is offline
VideoKarma Member
Join Date: Mar 2014
Location: Montvale, NJ
Posts: 162
FS: 16EP4B and 16GP4B

Both test good for emissions on my CR31.
It took about 10 minutes for the needle to get into good range, but this seems normal for a CRT that has been sitting for years. I did not raise the filament voltage or rejuvenate. Both CRT's came up on their own.

I have a second 16GP4 that comes up to the question range.

$125 each for the ones that come up into the good range, $75 for the one that comes into the ? range.

I also have a decent 16" porthole chassis if anyone is interested for $25.
Reply With Quote