Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   VideoKarma Classifieds (http://www.videokarma.org/forumdisplay.php?f=60)
-   -   Wanted: Zenith 9-160-03 module or compatible (http://www.videokarma.org/showthread.php?t=269399)

RetroHacker 08-09-2017 09:42 PM

Wanted: Zenith 9-160-03 module or compatible
 
Trying to repair a 13" Zenith set with a bad flyback that arcs. Looking for a replacement compatible module in working condition - or at least one that has a good flyback on it. Ideally, the whole module should be changed, this one is very corroded.

Thanks!

-Ian

zeno 08-10-2017 06:02 PM

The sub is 9-160-05.
Some sets had an extra cable that you just tie back.
It was for STBY & kick start. All new -03 were updated to the -05
and only sold as 9-160-05
BTW in the olden days they would NOT sell FBT's for theses
sets. It was only abt $10 more to by the board so why bother ?

73 Zeno:smoke:
LFOD !

RetroHacker 10-16-2017 04:09 PM

Just bumping this - still looking for one of these. Anyone have a spare? Or a spare flyback?

-Ian

RetroHacker 11-17-2017 02:21 PM

One more bump... Still looking for this, would love to salvage this set.

Thanks!

-Ian

Gunslinger 11-21-2017 07:39 PM

do not have xformer but do have a module rebuilding kit

dishdude 11-21-2017 10:26 PM

Sit tight, there were tons of these out there...a good one will turn up.

Kevin Kuehn 11-22-2017 12:32 AM

This one looks awfully close, or by chance at least the FBT is the same?

https://www.ebay.com/itm/Vintage-Zen...MAAOSwIJlZ~QZA

https://i.ebayimg.com/images/g/7mMAA...ZA/s-l1600.jpg

Kevin Kuehn 11-22-2017 12:34 AM

Sorry about the gigantic picture above.

dieseljeep 11-22-2017 10:57 AM

Quote:

Originally Posted by Kevin Kuehn (Post 3192406)
Sorry about the gigantic picture above.

That large picture is fine with me!
In my older age, I need everything larger.
The unit shown is a 9-160-6, used in the 25-27" modules.

dieseljeep 11-22-2017 11:09 AM

Quote:

Originally Posted by RetroHacker (Post 3187866)
Trying to repair a 13" Zenith set with a bad flyback that arcs. Looking for a replacement compatible module in working condition - or at least one that has a good flyback on it. Ideally, the whole module should be changed, this one is very corroded.

Thanks!

-Ian

I have three of those 13" Zeniths that use that module. All my sets are are in clean, complete condition and work perfectly. I'd rather sell you the entire set, but the shipping cost. :sigh:
I'll check with a fellow collector that has all kinds of Zenith parts.

RetroHacker 11-27-2017 02:37 PM

Unfortunately, the module from eBay was sold before I saw this post, so no luck there.

I spent an hour digging in my shed and finally unearthed the remains of another 13" Zenith set, thinking it might have compatible parts, but, no - it's 9-181-6C based. As far as I know, the flyback can't be swiped off that to use on the 9-160 board.

I really want to get this other set working - and, honestly, it *does* work, it just keeps arcing because the flyback is failing. Corona dope doesn't help it either.

So, I'm still on the hunt for this flyback or module.

-Ian

Kevin Kuehn 11-28-2017 01:57 PM

You should still contact that ebay seller. Listing says it never sold, but ended early because it's no longer available. You never know why it was pulled, or what else that seller could have lurking in their inventory.


All times are GMT -5. The time now is 04:40 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.