Stewart Warner 9100-B
6 Attachment(s)
I finally finished this mirror lid set recap last night. I had to drop the B+ voltage 15 volts, the set used selenium rectifiers. My AC mains runs at about 124 volts in the winter months. I also substituted a 330 ohm resistor for a 2.2k ohm resistor in series with the discharge cap in the blocking oscillator plate circuit. This was done to improve vertical linearity. The set is in Riders 3-1 and uses a 10FP4 crt.
Ed |
Are you sure about the CRT? I have this set and it has a 10FP4.
|
Quote:
Thanks for catching that, my mistake. :yes: Ed |
That's really neat.
|
I've seen many Sparton versions, but rarely a Stewart Warner. Cool to see it working!
|
All times are GMT -5. The time now is 03:47 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.