TV - Video - Vintage Television & Radio Forums TV - Video - Vintage Television & Radio Forums (
-   VideoKarma Classifieds (
-   -   WTT 6400RPM Atlas Drill press for '36 Zenith and '51 RCA restoration work.... (

vinyldavid 06-03-2013 11:41 PM

WTT 6400RPM Atlas Drill press for '36 Zenith and '51 RCA restoration work....
So I hope this is kosher, but, I've got something that might be of use to those in the DIY crowd here. If not, feel free to delete.

It's a big giant (nearly 6') Atlas drill press.

I'm just not going to be using it for at least the next few years. No need, no space.

It works great. Big giant Westinghouse motor. Made for truly industrial metalworking and such. Just beyond my needs.

Here's the only picture I have right now, when I go to where it is tomorrow, I'll grab better ones.

This sucker's gotta be local, or at least within a reasonable driving distance. I can help deliver, as I have a Suburban and strong cousin to help me get it out of the basement it's in. It's in St. Louis, MO.

Would love to swap for the restoration of my '36 Zenith 12-A-56 and '51 RCA TV/Radio/45 changer/33&78 changer. Zenith is an unknown quantity, RCA needs basic recapping on the audio side (and possibly a tube in the FM stage), changer rebuilds, the TV side is untested except for a known-tested-good 16GP4.

Thanks for looking!

vinyldavid 06-06-2013 10:50 PM

Here're some (slightly) better pics...

The support platform is 12" wide, and slightly shorter than 12" deep, as illustrated by this LP...

Other side. Light works, too.


vinyldavid 06-09-2013 07:51 PM

Just a bump. Also on CL for $950.

Delivery is very very possible to KC or Chi-town or other places, just FYI.

vinyldavid 07-05-2013 07:18 AM

Alrighty guys, last bump on this one.

Any offers at all? Trade?

All times are GMT -5. The time now is 07:39 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
ęCopyright 2012, All rights reserved.