Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   The Amateur Radio Spot (http://www.videokarma.org/forumdisplay.php?f=176)
-   -   Need Diagram for Gonset 6 meter Communicator (http://www.videokarma.org/showthread.php?t=270274)

davet753 03-25-2018 07:36 PM

Need Diagram for Gonset 6 meter Communicator
 
1 Attachment(s)
Here's a Gonset Communicator II I picked up recently. It seems most of the tubes in the receiver chassis don't match what the service manual says, but since my manual is for the 2 meter version, and this rig is a 6 meter, that might explain what's going on. This old gal has some issues, that's for sure, but before I get too deep into it I'm gonna need a good diagram.

Would anyone happen to have a manual for the 6 meter Communicator? I could probably use the Communicator I or II, as long as it's for 6. The Communicator III is quite different.

Thanks!

radioal 03-25-2018 08:53 PM

Quote:

Originally Posted by davet753 (Post 3197515)
Here's a Gonset Communicator II I picked up recently. It seems most of the tubes in the receiver chassis don't match what the service manual says, but since my manual is for the 2 meter version, and this rig is a 6 meter, that might explain what's going on. This old gal has some issues, that's for sure, but before I get too deep into it I'm gonna need a good diagram.

Would anyone happen to have a manual for the 6 meter Communicator? I could probably use the Communicator I or II, as long as it's for 6. The Communicator III is quite different.

Thanks!

Try bama.edebris.com/manuals/gonset

The goncom2b covers 6m. Some of the others may as well

73
Kd4tmw

Sent from my LG-SP200 using Tapatalk


All times are GMT -5. The time now is 04:22 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.