Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Rectangular Screen Tube Televisions (http://www.videokarma.org/forumdisplay.php?f=45)
-   -   My new 1967 Motorola TS-921 (http://www.videokarma.org/showthread.php?t=269641)

TUD1 10-13-2017 01:52 PM

My new 1967 Motorola TS-921
 
2 Attachment(s)
Scored this today in rural Tennessee for only $10. Unfortunately, just like the roundie, it is a very high hour set, with a weak CRT, and no HV. Many updates to come as I make progress cleaning it up.

TUD1 10-13-2017 03:20 PM

This is just the TV I'd expect to find on Friday the 13th. It's so high hours, that the tube sockets crumble when looked at, and it is full of thick, grimy dust. It's scary dirty.

old_tv_nut 10-13-2017 04:22 PM

At least there's no mice. If there were, you'd hear them sneezing.

Celt 10-13-2017 04:44 PM

Good lookin' set though. :yes:

TUD1 10-13-2017 06:29 PM

I cleared the cataract out of the rebuilt picture tube today. Getting the cataract goo out was the easy part. Putting the tube back in - I hope to never have to put a tube in a Motorola ever again. It is the most idiotic way of mounting a picture tube ever conceived.

zeno 10-14-2017 08:34 PM

Yup they suckt so did Admiral especially UG'ing from a 23EGP22.

HINT
Put a box under the CRT. When its loose the cabinet will drop down
& you can easily pick up the jug. In reverse use a light & mirror
to be sure the CRT is centered then torque it down. Some Jap
sets come out the front & are bolted from the front. Do the same
but lift the cabinet away. Have a 10 MM deep on hand for them.
Newer sets with "ears" to mount usually come out as an assy.
Shield, DGS coil, yoke etc. Pull & put on table, also the new CRT
& move things over standing up. The lazy way is the best here.

73 Zeno:smoke:
LFOD !

Electronic M 10-14-2017 09:57 PM

Only Moto of that era I've owned was a table set that had spent decades sitting on it's side rusting in a basement....If you think that console is bad try dealing with a cramped rusty metal box with stuck fasteners! The only good part of that cataract job I did on that set (aside from the CRT surviving) was that I needed to dismantle the whole thing anyway and the cataracting made me do it sooner.
It's the top set in the pic.
https://farm9.staticflickr.com/8379/...6e567af0_z.jpgDSCN2146 by Tom Carlson, on Flickr


All times are GMT -5. The time now is 09:05 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.