Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Antique phonographs (http://www.videokarma.org/forumdisplay.php?f=178)
-   -   Metz babyphon 101 Question (http://www.videokarma.org/showthread.php?t=268528)

Timm 02-14-2017 02:05 PM

Metz babyphon 101 Question
 
I am getting a Metz babyphon which needs work and I was wondering how to lubricate turn controls like volume knob etc. If I use pb blaster I am afraid it would leave a lingering smell and also what cartridge does it require thank you.

MadMan 02-15-2017 01:11 AM

Well I don't know the house's recommendation around here, but PB blaster is far too thin. It'll run right off after a couple days. Unless the controls are frozen, I wouldn't use it. Personally, I prefer white lithium grease in aerosol cans. Either Liquid Wrench or WD brand, all the others I've tried suck. It has good adhesion and lubricates nicely.

Electronic M 02-15-2017 07:39 AM

PB blaster is not really a control cleaner...If the shaft is stuck it's good at freeing it. The best control cleaner is Deoxit, but it is also stupid expensive. De-Ox-ID I've found to be roughly equivalent in performance but much cheaper. WD-40 works in a pinch but it does not last as long....A dirty pot cleaned with WD-40 will be good for ~1 year before re-cleaning becomes needed where as the purpose made control cleaners tend to last ~5 years.


All times are GMT -5. The time now is 12:05 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.