Konrad Schiecke
11-29-2006, 01:47 PM
Hi: Does anybody have a scan/pdf or jpg of the schematic for a GE Locomotive TV that they could e-mail me?
Thank you, Konrad
Thank you, Konrad
View Full Version : GE Locomotive Schematic Konrad Schiecke 11-29-2006, 01:47 PM Hi: Does anybody have a scan/pdf or jpg of the schematic for a GE Locomotive TV that they could e-mail me? Thank you, Konrad N9ZQA 11-29-2006, 04:27 PM Konrad - I'll have to look, but I think I have the Photofact in .pdf for that set at home. I've got it's 12" brother - same chassis IIRC. Jim N9ZQA 11-30-2006, 07:44 AM Konrad - I don't have that one in a .pdf as I originally thought. I've got a photocopy of it. I can scan it in this evening and send it to you. Let me know if you'd still like it. Jim Konrad Schiecke 11-30-2006, 07:49 AM Thanks Jim,The photocopywill give me a start. Konrad N9ZQA 12-01-2006, 12:00 AM Konrad - Schematic is available at http://putstuff.putfile.com/18442/5296312 There are three pages in the file; let me know if you need any of the other service information. This schematic is for models 10T1-10T6; I hope this helps you out. Jim Konrad Schiecke 12-01-2006, 11:30 AM Jim: I got your files.thank you.If you have the voltage reference page that would also be a help. The schematic brought back memories when I was servicing sets in the mid 50's. The biggest complaint on the GE sets was :the set is dead and the house smells like rotton eggs. The ten man staff in the shop i worked all carried sellimum rectifiers in their tube caddys. That issue was an in house repair and was not to be brought into the shop. The second biggest complaint was a shop job and had to do with bad flybacks. The good old days!!! Thanks again, Konrad N9ZQA 12-02-2006, 09:26 AM Konrad - Here is the voltage and resistance page: http://putstuff.putfile.com/18909/1060567 Let me know if you need anything else. Jim |