Anyone got a service manual for this? Might be made by Sampo. It's a 10" CRT runs off 12V probably came from a conversion van. Likely was never used. I wanted to use it as a monitor for a Timex Sinclair.

Anyway I used a nice stable 12V 4.5 amp source which is plenty to power it, issue is it doesn't seem to have any sort of contrast control. When it's in a bright screen the material is too dark unless you set the brightness up, if it switches to a dark scene than the material is washed out. Could use some other minor adjustments as well.

For manual see if it has an FCC type number on the
back. If so run it on FCC.gov & it will tell you original
make & model. Works for monitors too !

BTW is this a B&W or color ?? Sounds like it may be CRT.

73 Zeno:smoke:
LFOD !

For manual see if it has an FCC type number on the
back. If so run it on FCC.gov & it will tell you original
make & model. Works for monitors too !

BTW is this a B&W or color ?? Sounds like it may be CRT.

73 Zeno:smoke:
LFOD !

It's a small color CRT. And no there is no FCC type number. I speculated Sampo just because the flyback had a Sampo sticker in it and I thought I saw Sampo on one other part. Didn't see any immediate part number jump off the pcb either.