View Full Version : Service manual for Audiovox AVT-950?


yrly
10-27-2017, 01:49 AM
Anyone got a service manual for this? Might be made by Sampo. It's a 10" CRT runs off 12V probably came from a conversion van. Likely was never used. I wanted to use it as a monitor for a Timex Sinclair.

Anyway I used a nice stable 12V 4.5 amp source which is plenty to power it, issue is it doesn't seem to have any sort of contrast control. When it's in a bright screen the material is too dark unless you set the brightness up, if it switches to a dark scene than the material is washed out. Could use some other minor adjustments as well.

zeno
10-27-2017, 09:35 AM
For manual see if it has an FCC type number on the
back. If so run it on FCC.gov & it will tell you original
make & model. Works for monitors too !

BTW is this a B&W or color ?? Sounds like it may be CRT.

73 Zeno:smoke:
LFOD !

yrly
10-27-2017, 11:38 AM
For manual see if it has an FCC type number on the
back. If so run it on FCC.gov & it will tell you original
make & model. Works for monitors too !

BTW is this a B&W or color ?? Sounds like it may be CRT.

73 Zeno:smoke:
LFOD !

It's a small color CRT. And no there is no FCC type number. I speculated Sampo just because the flyback had a Sampo sticker in it and I thought I saw Sampo on one other part. Didn't see any immediate part number jump off the pcb either.