I need some advice on if and how you can go about adjusting the Horizontal on a 1991 Zenith Console TV. My Zenith Doesn't have the Adjustment on the back near the bottom of the TV like my RCA TV does.

I believe my horizontal on the TV currently is a little out of Adjustment.

Unlikely but you might have a service menu that can be accessed. If not there might be an adjustment inside the set. However the issue might be a bad capacitor or another part in the horizontal circuit that's drifting out of spec.

I need some advice on if and how you can go about adjusting the Horizontal on a 1991 Zenith Console TV. My Zenith Doesn't have the Adjustment on the back near the bottom of the TV like my RCA TV does.

I believe my horizontal on the TV currently is a little out of Adjustment.

If you want help, a little info goes a long way....

http://www.videokarma.org/showthread.php?t=265964

I need some advice on if and how you can go about adjusting the Horizontal on a 1991 Zenith Console TV. My Zenith Doesn't have the Adjustment on the back near the bottom of the TV like my RCA TV does.

I believe my horizontal on the TV currently is a little out of Adjustment.

Are talking about the horiz. position or horiz size?

OP hasn't visited since his original post. No model number, no help from me. Years are USELESS.

OP:Simply post the model number (or a chassis number) and help will flow.