View Full Version : Setchell Carlson Square set yoke connection

06-28-2016, 11:43 AM
If anyone has the wiring diagram laying around, I need the yoke connections for this chassis (U803 I think). I had to disconnect everything when I took it, and can't remember how the pincushion and other connection were done.

06-28-2016, 12:00 PM
I probably have the Sams. What model?

06-28-2016, 02:12 PM
Not sure, I was only able to grab the chassis and CRT. Didn't have room for the cabinet, which was pretty far gone anyway. I believe it's the same chassis as the roundie version, just with a pincushion circuit added to it. That aluminum unitized deal, really easy to service. Only took me like a half hour to recap it.

06-28-2016, 07:52 PM
I'll see if I can come up with a Sams with just that number tomorrow......

06-28-2016, 08:36 PM
S-C U803 chassis is Sams 913-1. All the best,Tom

06-29-2016, 07:50 AM
My Sams skips from 911 to 915 :dammit:

But Nick, give Ed a call. I gave him all the S-C schematics that I had, and there was a pile of them. Pretty sure that one was in there.

07-07-2016, 02:39 PM
Ed didn't end up having it, but he did grill me for an hours for info on his Hoffy set. lol

Anyone else think they might have the folder/set for this? Maybe even just a shot of the yoke connections for me to look at would help, I should have written it down.

07-07-2016, 03:17 PM
Oh he has it. He just forgot where he put it :P

Find me a model number from *any* S-C color set with a similar chassis that's not in folder 913?

07-07-2016, 04:50 PM
Here you go Tim, U804_918-3, U806_978-2, U807_979-2 and U808_980-3. All the best,Tom

07-08-2016, 10:56 AM
Perfect! This help, Nick?

07-08-2016, 10:57 AM
Lemme know if you need a better scan.....

07-08-2016, 11:56 AM
I think that's just the convergence stuff, I need the deflection yoke connections. Not sure if it would be the same with that CRT either, I have a 25AP22 in mine.

07-08-2016, 11:58 AM
That was the only one I had out of the ones Tom listed.....

07-08-2016, 05:43 PM
Well see if you can scan the other section of it showing the deflection yoke connections, either it'll work or it won't.

Kevin Kuehn
07-08-2016, 05:47 PM
Sorry I didn't notice this post earlier. Setchell Carlson printed some really large schematics, and then folded the crap out of them. :D Let me know if you need any other area's close up.

07-09-2016, 09:48 PM
That's the one, thanks Kevin!