bandersen
08-05-2011, 08:56 PM
I attended the ARCI (Antique Radio Club of Illinois) swapfest today. I spent most of my time digging through boxes of knobs and hanging out with WISCOJIM.
Here are a whole bunch of photos I took (http://www.flickr.com/photos/70039806@N00/sets/72157627365644940/with/6012805009/)
Jim kindly gave me an empty Admiral 19A11 bakelite cabinet. That will go towards restoring the smashed one I picked up recently
http://farm7.static.flickr.com/6143/6013271002_b32f3c9a0e_b.jpg
http://farm7.static.flickr.com/6143/6013353962_19ed3e597d_b.jpg
It's actually black bakelite while the broken one is brown. Which is fine by me. All my other bakelite sets are brown and it's nice to mix thing up. I even have some blank and brass knobs that I think will look great. I'll just need to extend the shafts a little.
http://farm7.static.flickr.com/6005/6013354402_ac4f94379a_z.jpg (http://www.flickr.com/photos/70039806@N00/6013354402/)
Admiral 19A11 knobs (http://www.flickr.com/photos/70039806@N00/6013354402/) by bandersen (http://www.flickr.com/people/70039806@N00/), on Flickr
Speaking of knobs, I dug through quite a few bins and came up with these. I finally have two of the four gold knobs for my 7VT2 :)
I don't really need the xtra gold or red 9T1 and 9VT1 knobs, but I figured someone might.
I do need a matching outer knob for that Philco knob center/front if anyone has a spare.
http://farm7.static.flickr.com/6003/6012805009_5b197d80e2_b.jpg
Finally, I couldn't leave with out buying at least one set so picked up this poor little Emerson 639.
The metal back is there, has all the knobs and looks OK inside. The cabinet could use some new vener though. I'll take a closer look later tonight.
http://farm7.static.flickr.com/6015/6012722067_b522029d35_b.jpg
Here are a whole bunch of photos I took (http://www.flickr.com/photos/70039806@N00/sets/72157627365644940/with/6012805009/)
Jim kindly gave me an empty Admiral 19A11 bakelite cabinet. That will go towards restoring the smashed one I picked up recently
http://farm7.static.flickr.com/6143/6013271002_b32f3c9a0e_b.jpg
http://farm7.static.flickr.com/6143/6013353962_19ed3e597d_b.jpg
It's actually black bakelite while the broken one is brown. Which is fine by me. All my other bakelite sets are brown and it's nice to mix thing up. I even have some blank and brass knobs that I think will look great. I'll just need to extend the shafts a little.
http://farm7.static.flickr.com/6005/6013354402_ac4f94379a_z.jpg (http://www.flickr.com/photos/70039806@N00/6013354402/)
Admiral 19A11 knobs (http://www.flickr.com/photos/70039806@N00/6013354402/) by bandersen (http://www.flickr.com/people/70039806@N00/), on Flickr
Speaking of knobs, I dug through quite a few bins and came up with these. I finally have two of the four gold knobs for my 7VT2 :)
I don't really need the xtra gold or red 9T1 and 9VT1 knobs, but I figured someone might.
I do need a matching outer knob for that Philco knob center/front if anyone has a spare.
http://farm7.static.flickr.com/6003/6012805009_5b197d80e2_b.jpg
Finally, I couldn't leave with out buying at least one set so picked up this poor little Emerson 639.
The metal back is there, has all the knobs and looks OK inside. The cabinet could use some new vener though. I'll take a closer look later tonight.
http://farm7.static.flickr.com/6015/6012722067_b522029d35_b.jpg