chipper
01-19-2011, 11:29 AM
I have a set that uses these bumble bee caps, any suggestions where I can find some replacements. thanks
View Full Version : .00005/10,000v caps chipper 01-19-2011, 11:29 AM I have a set that uses these bumble bee caps, any suggestions where I can find some replacements. thanks bandersen 01-19-2011, 12:36 PM That would be 50pF @ 10 kV. Are you sure it's not 500 pF ? Those are standard doorknob type caps use for TV HV filters and doublers. Just Radios has 470pF @ 15kV http://www.justradios.com/orderform.html chipper 01-19-2011, 12:48 PM I had to many zeros, the correct value is .0005/10.000volts. used in a delco tv chassis Eric H 01-19-2011, 01:31 PM Are these used for the high voltage filters? If so they can be replaced with a Ceramic cap and the value isn't too critical as long as it's equal or greater. I used a couple .001@10k Ceramic discs for that purpose. Mouser might have something that will work. Phil Nelson 01-19-2011, 01:49 PM http://www.justradios.com/ sells a .00047/15KV tubular cap that I have used in TV high voltage circuits. On their cap order form, look under the 6KV caps. http://antiqueradio.org/art/DuMontRA-113HVCaps.jpg Phil Nelson http://antiqueradio.org/index.html Findm-Keepm 01-19-2011, 07:02 PM Allied Electronics also carries the ASC caps in Phil's post - cheaper, and much quicker on the shipping than justradios. $3.28 for Allied's 225-6085. I realized that's where they got them from when I got my last Allied order - same date and lot codes as justradios. I also check out Allied's Clearance ("Excess Inventory") stuff - I got a lot of resistors and caps dirt cheap in early December from them. I'm set for now! Cheers, chipper 01-20-2011, 09:57 PM Hey thanks for the info; these caps are in my Delco tv-71 set. |